PRODUCTS CENTER

No data
LWY Type Liquid Turbine Flowmeter
Keyword:
Flowmeter
Category:
Flowmeter
Turbine flowmeter

E-mail:
Details
The LWY series liquid turbine flowmeter belongs to the speed type flow instrument.Sensors have the characteristics of simple structure, lightweight, high accuracy, good repeatability, sensitive response, and convenient installation, maintenance, and use. They are widely used in industries such as petroleum, chemical, metallurgy, water supply, papermaking, etc. They are ideal instruments for flow measurement and energy conservation.
Vortex flow meters have no moving parts, are sturdy and simple in structure, are not easy to block, not easy to block, not easy to scale, and are resistant to high temperature and pressure. They are widely used for measuring the flow rate of steam, gas, and liquid. It is one of the widely used flow meters. In order to ensure the measurement accuracy of vortex flow meters in the long term, the correct installation of vortex flow meters is an important foundation. Next, we will explain in detail how to correctly install the vortex flowmeter and the precautions for its installation.
We need to first understand the requirements for the installation environment of vortex flow meters:
(1)Try to avoid strong current equipment, high-frequency equipment, and strong switching power supply equipment. The power supply of vortex flow meters should be separated from these devices as much as possible to prevent external interference.
(2)Avoid high humidity environment and strong corrosive gas environment. Ventilation measures need to be taken during installation.
(3)Try to avoid installation in environments that directly affect high-temperature heat sources and radiation sources. If it is not possible to choose, insulation and ventilation measures need to be taken.
(4)Try to install the vortex flowmeter in the pipeline section with weak vibration. If unavoidable, pipe fastening devices can be installed upstream and downstream in 2D, and anti vibration pads can be added to enhance the anti vibration effect.
(5)Vortex flow meters should be installed indoors as much as possible. When installing outdoors, attention should be paid to waterproofing. In particular, the cable should be bent into a U-shape at the electrical interface to prevent water from entering the amplifier casing along the cable.
(6)When selecting the installation point for the vortex flowmeter, sufficient space should be left around for installation, wiring, and subsequent maintenance.
Requirements for Vortex Flowmeter in Pipeline Installation:
The installation of vortex flow meters requires certain requirements for the upstream and downstream straight pipe sections of the installation point, otherwise it will affect the smoothness of the medium in the pipeline, thereby affecting the measurement accuracy of the flow meter.The required straight pipe length for instruments is as follows:
(1)The inner diameter of the upstream and downstream pipelines should be the same. If there is a difference, the inner diameter Dp of the pipeline and the inner diameter Dp of the vortex flowmeter should meet the following relationship: 0.98Db ≤ Dp ≤ 1.05Db, the upstream and downstream pipelines should be concentric with the inner diameter of the vortex flowmeter, and the axial degree difference between them should be less than 0.05Db.
(2)The gasket between the instrument and flange should not protrude into the pipeline during installation, and its inner diameter should be 1-2mm larger than the inner diameter of the instrument.
Installation steps of vortex flowmeter:
(1)Drill holes on the pipeline according to the requirements of the hole size, so that the hole position meets the requirements of the straight pipe section.
(2)Place the complete flow meter connected to the upper flange into the open pipeline.
(3)Perform welding positioning on both sides of the two flanges. Remove the flow meter, weld the flange as required, and clean all protruding parts in the pipeline.
(4)Install the vortex flowmeter in the middle of the flange by installing the same sealing gasket as the pipeline through the inner groove of the flange, so that the flow direction mark of the flowmeter is the same as the fluid direction.
Installation of Vortex Flowmeter on Horizontal Pipeline:
(1)When measuring gas flow, if the measured gas contains a small amount of liquid, the flowmeter should be installed at the higher part of the pipeline.
(2)When measuring liquids, if the measured liquid contains a small amount of gas, the flowmeter should be installed in the lower part of the pipeline.
Installation of vortex flowmeter in vertical pipelines:
(1)When measuring gas, the flow meter can be installed on a vertical pipeline with unrestricted flow direction.
(2)If the measured gas contains a small amount of liquid, the gas flow rate should be from bottom to top.
(3)When measuring the direction of liquid flow, the direction of liquid flow should be from bottom to top.
Liquid Turbine Flowmeter LWY |
|
Specifications and Dimensions |
DN4~DN200 |
Pressure Rating |
PN1.6(DN50~150)~6.3MPa(DN4~40),PN1.0/DN200 |
Fluid |
Various non corrosive clean fluids such as water and oil |
Connection |
Flange、Screw |
Ambient Temperature |
-20~55℃ |
Medium Temperature |
-20~120℃ |
Power Supply |
90~250VAC 50/60HZ,18~36VDC,Power less than 10W |
Output Signal |
4~20mA,Load less than 500 ohms,frequency 0-5KHz passive |
Accuracy |
±0.5%、±1%(Flow rate greater than 1m/s) |
Pre
Pre
LWQ Gas Turbine Flowmeter
Related products
Messages
Please leave your phone number or email address, and we will contact you within 24 hours