Under what conditions can fork pneumatic actuators be used
- Categories:News
- Author:
- Origin:
- Time of issue:2021-10-09 13:50
- Views:
(Summary description)Fork pneumatic actuator is an actuator that uses air pressure to drive open and close or adjust valves. Also called pneumatic actuator or pneumatic device. It uses compressed air to push the piston in the pneumatic actuator, so as to drive the intermediate shaft to rotate 90 degrees. At present, the common transmission mode is gear rack meshing structure. The rack is mounted on the piston. When the piston drives the rack to move, the gear rotates. This structure has better effect under low torque conditions. Under high torque conditions, it is difficult to drive the shaft to rotate by relying on gears and racks. Therefore, in order to make the pneumatic actuator work well under high torque, people have developed the fork pneumatic actuator.
Under what conditions can fork pneumatic actuators be used
(Summary description)Fork pneumatic actuator is an actuator that uses air pressure to drive open and close or adjust valves. Also called pneumatic actuator or pneumatic device. It uses compressed air to push the piston in the pneumatic actuator, so as to drive the intermediate shaft to rotate 90 degrees. At present, the common transmission mode is gear rack meshing structure. The rack is mounted on the piston. When the piston drives the rack to move, the gear rotates. This structure has better effect under low torque conditions. Under high torque conditions, it is difficult to drive the shaft to rotate by relying on gears and racks. Therefore, in order to make the pneumatic actuator work well under high torque, people have developed the fork pneumatic actuator.
- Categories:News
- Author:
- Origin:
- Time of issue:2021-10-09 13:50
- Views:
Information
Fork pneumatic actuator is an actuator that uses air pressure to drive open and close or adjust valves. Also called pneumatic actuator or pneumatic device. It uses compressed air to push the piston in the pneumatic actuator, so as to drive the intermediate shaft to rotate 90 degrees. At present, the common transmission mode is gear rack meshing structure. The rack is mounted on the piston. When the piston drives the rack to move, the gear rotates. This structure has better effect under low torque conditions. Under high torque conditions, it is difficult to drive the shaft to rotate by relying on gears and racks. Therefore, in order to make the pneumatic actuator work well under high torque, people have developed the fork pneumatic actuator.
News information
0411-87122267
Messages
Add：No. 98, Guandong Road, Maoyingzi village, Ganjingzi District, Dalian, Liaoning Tel：0411 8712 2267 / +86 176 1667 5206 E-mail：ace@aceflow.cn
Copyright © 2020 DALIAN ACE FLOW TECH CO., LTD 辽ICP备11002186号-2 Powerby:300.cn dalian